Operation Guide of Furniture Making Vacuum Membrane Press Machine

1. Do a good job of starting the equipment inspection of furniture making vacuum membrane press machine, turn on the power switch, the power indicator light is turned on, the voltmeter shows the voltage 380v, the cylinder valve of the liquefied gas station is opened, and the carburetor heating device is also activated.

2. Turn on the compressed air switch of furniture making vacuum membrane press machine, the normal working pressure is required to be greater than 0.5mpa.


3. Adjust furniture making vacuum membrane press machine to automatic production state and confirm

The status of the warehouse and valves displayed on the PLC touch screen. If the colors are correct, start the furniture making vacuum membrane press machine in turn. Enter the recipe requirements and production process parameters into the PLC control computer as required.


4. In the production process, always pay attention to the abnormal operation of furniture making vacuum membrane press machine to ensure the storage state of raw materials is sufficient.

Full production, to prevent whether the hoist is blocked, the storage state of the finished product hopper.

Always pay attention to the accuracy of the furniture making vacuum membrane press machine setting to increase various raw materials, such as net weight and timing, and determine whether the mixing time and cooling time of each raw material meet the requirements of process quality.